banner
Home » NEWS » Content
Product Categories

The Relationship Between Cutting Speed Of Laser Cutting Machine And Material Cutting Effect

- Dec 03, 2018 -

Metal laser cutting machine is very important in the choice of speed when making the material cutting. If the speed is too slow, it will affect the production. If the speed is fast, but the quality is to be exchanged, it will not be worth the loss. In fact, the metal laser cutting machine is not so simple in terms of control speed. The cutting speed is often tested according to a range provided by the manufacturer's technology to find a suitable cutting speed. The cutting speed is also different because of the thickness of the cutting material, the composition of the material, and the difference in ductility and thermal conductivity.

General performance:

1. The proper increase of the speed of the laser cutting machine not only improves the quality of the slit, but also makes the slit narrow and flat, and can also reduce the deformation of the slit.

2. If the cutting speed is too fast, the cutting line energy will be lower than the required amount. During the slitting process, the blowing can not blow off the molten material quickly, which will result in a large amount of back drag, affecting the slit. The completeness of the situation may even occur if secondary processing is required.

3. If the speed of the laser cutting machine is too low, the cutting position will be exposed to the high temperature of the laser for a long time, which not only causes the cutting seam to become large but also may affect the appearance of the slit due to too much heat conduction. The phenomenon of dross is formed on the back side of the metal.

4. When the speed is extremely low, the slit melts too much, the slit is wider, and even the arc is extinguished, and the cutting cannot be performed.

Therefore, the cutting speed will affect the cutting quality, not just from the cutting speed, I hope everyone should be careful when operating the metal laser cutting machine.

Metal laser cutting machine is very important in the choice of speed when making the material cutting. If the speed is too slow, it will affect the production. If the speed is fast, but the quality is to be exchanged, it will not be worth the loss. In fact, the metal laser cutting machine is not so simple in terms of control speed. The cutting speed is often tested according to a range provided by the manufacturer's technology to find a suitable cutting speed. The cutting speed is also different because of the thickness of the cutting material, the composition of the material, and the difference in ductility and thermal conductivity.

General performance:

1. The proper increase of the speed of the laser cutting machine not only improves the quality of the slit, but also makes the slit narrow and flat, and can also reduce the deformation of the slit.

2. If the cutting speed is too fast, the cutting line energy will be lower than the required amount. During the slitting process, the blowing can not blow off the molten material quickly, which will result in a large amount of back drag, affecting the slit. The completeness of the situation may even occur if secondary processing is required.

3. If the speed of the laser cutting machine is too low, the cutting position will be exposed to the high temperature of the laser for a long time, which not only causes the cutting seam to become large but also may affect the appearance of the slit due to too much heat conduction. The phenomenon of dross is formed on the back side of the metal.

4. When the speed is extremely low, the slit melts too much, the slit is wider, and even the arc is extinguished, and the cutting cannot be performed.

Therefore, the cutting speed will affect the cutting quality, not just from the cutting speed, I hope everyone should be careful when operating the metal laser cutting machine.