Fabric Laser Engraving Machine is mainly used for laser processing of textile and apparel fabrics. It is engraved with a CO2 laser tube, the fabric does not have a focus edge, has a good flatness and good edges.
1. It uses CO2 laser as working light source and is a high-tech product composed of laser engraving proprietary software.
2. It is equipped with an automatic control system and a precisely controlled workbench.
3. It is easy to operate, flexible and convenient to edit, compatible with various software: AutoCAD, CorelDraw, etc.
4. It has a revolutionary structural design that can end the deformation of the old sealer.
5. Its low noise, stable and reliable, maintenance-free.
40W/60W/80W CO2 laser
Bulit-in Water Cooling System
100MM Adjustable/MIRA Plus 150MM Adjustable
Laser Output Control
1-100% Set by Software
Minimum Engraving Size
Chinese Charator 2.0mm*2.0mm, English Letter 1.0mm*1.0mm
Max Scanning Precision
0-8mm(depends on different materials )
Graphic Format Supported
CorelDraw/Photoshop/AutoCAD/All kinds of Embroidery Software
AC 220V+10%, 50Hz/60Hz
1. When using automatic focal length, be careful that the automatic measuring stick must be tightened, otherwise the work surface will be topped to the laser.
2. When the laser engraving machine is working, it is forbidden to open the cover.
3. Open the smoke exhaust and blow smoke equipment during processing.
4, processing wood, paper, you must pay attention to the processing speed to avoid fire.
5. The initial user performs red light positioning when performing irregular processing.
6. When processing thin wood boards and variability materials, it is necessary to adjust the variable width water product by 1mm.
7. When cutting, use the workpiece rack 2 cm or more from the workbench.
8. Cleaning of the reflective lens and the focal length lens: pinching the reflective lens with two fingers. The other hand holds the camera lens cleaning paper to clean the lens.
9. When the document is usually engraved, the resolution should be higher. When engraving the file, the resolution should be lower.