The Small Laser Engraving Machine allows you to precisely laser mark, create barcodes, serial numbers, texts and logos in any graphics software or labeling program.
Laser marking is a non-contact, permanent process that can be marked without stress points and deformations created by other marking methods.
The Small Laser Engraving Machine allows you to precisely laser mark, create barcodes, serial numbers, texts and logos in any graphics software or labeling program. Laser marking is a non-contact, permanent process that can be marked without stress points and deformations created by other marking methods.
CO2 glass tube
AC220±10% 50HZ / AC110±10% 60HZ
Max Moving Speed
Min Shaping Character
Character 2×2mm Letter:1×1mm
less than 4500dpi
Data transfer Interface
WINDOWS 2000/ WINDOWS XP/Visa/win7
Water Cooling and Protection System
Graphic Format Supported
files which CorelDraw,Photoshop, AutoCAD can identify(BMP,GIF,JPGE,PCX,TGA,TIFF,PLT,CDR,DMG,DXF,etc)
0–10mm(depends on different material)
Separation of cutting up to 256 colors
Yes,slope can be designed discretionarily
Cuts off the water supply the protection
high-grade cooling system/imported focus lens
Net Weight/Gross Weight
1.laser tube：Fast engraving, high precision, smooth burr-free engraving surface, high electro-optical conversion rate, power saving, and no fear of harsh environments. High tolerance for dust, vibration, temperature, humidity, etc.
2. The laser head focusing lens is made of special materials to make it durable and durable. The beam has strong stability and a full protection window. The lens is free from high-temperature cracks, and it is equipped with intelligent induction blowing and precise red light positioning system.
3. The new control system, a visualized operation panel, can synchronously display the shape, speed, time, power and other messages that will make you confident.
4. The climate control air conditioning water-cooled machine, so keep the water temperature constant cold state, to prevent the machine to overheat and damage the components.
5.Servo motor: high precision, high speed, strong anti-overload, stable operation with low vulgarity, short dynamic time for motor acceleration/deceleration, low heat generation and noise.
Small Laser Engraving Machine is suitable for non-metallic materials such as plexiglass, acrylic, wood, plastic, crystal, rubber, ceramic tile, bamboo, grantile, marble, resinetc. It is suitable for art gifts, fabrics, toys, marble, grantile, crystal. Paper products, acrylic and other industries.
1. Special need to adjust the light intensity not to exceed 20MA, in order to prevent the laser tube from aging rapidly.
2. The mirror should be carefully cleaned on the machine, otherwise the light path must be reset.
3. It is strictly forbidden to use inferior circulating water. Inferior circulating water can seriously affect the laser power and greatly shorten the service life of the laser tube. Laser tube damage caused by users using inferior water is not covered by the warranty. Pure water is recommended.
4. Please pay attention to the focus before each operation, and the focus will not seriously affect the engraving effect.
5. The third transmitting mirror and focusing mirror must be removed and cleaned. After cleaning, the lens must be installed securely, but not too tight to avoid lens breakage.