Laser cutting machine is a high-precision mechanical device, the requirements of its use process are more stringent, and a key component of the left and right laser cutting effect is the installation of the laser cutting machine lens, if the component does not follow the prescribed steps Installation can easily lead to deviations in the cutting centre or even the misalignment of the cutting machine. What should you pay attention to when installing laser cutting machine lenses?
Step 1: Wash your hands before handling. It is best to wash your hands with soap or detergent. This is a good habit for normal operation of the cutting machine lens. Do not use bare-hand contact lenses directly. Wear special gloves to prevent fingerprints from remaining on the lens.
Step 2: When the lens is placed, pay attention to it to avoid slipping and falling, and pay attention to the convex surface of the lens facing up on a smooth and clean desktop. At the same time, pay attention to check the desktop without debris, so as to avoid confusion or affect the operating environment of the lens.
Step 3: The laser cutting machine lens should be protected against moisture, and the lens should not be wiped by the traditional blowing method. The hot air should not be blown with the lens to protect the lens from thermal shock. The lens is highly precise, and the temperature and humidity are strictly controlled to avoid affecting the lens surface protective film and optical precision.
Step 4: After the laser cutting machine lens is assembled, pay attention to the cleaning and dust removal of the lens. It is best to use a clean air spray gun to clean the gun. Do not use an ordinary spray gun.
Step 5: The cutting machine lens should be absolutely clean and pay attention to the lens surface directly by hand, and strictly prevent other non-designated items from directly contacting the lens surface. Apply a professional wiper to the lens during cleaning and maintenance. Gently pull from the side to the other side to avoid scratching the lens surface.