Laser cutting machine should pay attention to maintenance and maintenance in use, which is easy for many users to ignore. In the end, not only the cutting precision and efficiency of laser cutting machine are reduced, but also the service life of laser cutting machine is shortened. Therefore, we recommend that you still pay attention to the maintenance of stainless steel laser cutting machine, then how should we maintain and maintain the stainless steel laser cutting machine?
1. Check the straightness of the track and the verticality of the machine every six months regularly. If it is found to be abnormal, it should be maintained and debugged in time. Otherwise, it is possible that the effect of cutting is not so good, the error will increase, and the cutting quality will be affected. This is a top priority and must be done.
2, once a week with a vacuum cleaner to absorb dust and dirt inside the machine, all electrical cabinets should be strictly dust-proof.
3, each rail should be cleaned frequently, to eliminate dust and other debris, to ensure that the normal rack of equipment should be wiped regularly, add lubricant, to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently. The machine can move better during the journey, and the quality of the cut products will be improved.
4, double focal length laser cutting head is a fragile item on the stainless steel laser cutting machine, long-term use, resulting in laser cutting head damage. Regular inspections and repairs are required. If there is any deformation or other forms, you should know that the laser cutting head is a little damaged and needs to be replaced. Failure to replace will affect the quality of the cut and increase the cost. Some products may have to be processed twice to reduce production efficiency. The laser cutting head is to be produced by a professional manufacturer. When purchasing the product, it should be carefully checked to avoid problems when it is used.